Compressed air is a costly form of energy
and 20 to 40% of it is lost through leaks.
Systematically checking for and eliminating
leaks can therefore bring considerable
energy savings.
LEAKSHOOTER® LKS1000-V3T+PRO is a unique
and sensational detection device:
- It uses a camera and a dynamic on screen
target to precisely find leak location (patent).
- It features a new concept of Steam Trap
diagnostic: The STRAPSHOOTER+®.
The STRAPSHOOTER+® program is an Easy
to use firmware which can automatically
diagnose your Steam Trap condition state.
LEAKSHOOTER® LKS1000-V3T+PRO is
extremely sensitive, capable to find
compressed air leaks (not bigger than the
size of syringe needle) at a distance of
20m.
The LEAKSHOOTER® LKS1000-V3T+PRO is
used like a camera.
When it comes near a leak, a dynamic
yellow target appears on the large colour
screen. The target turns red and shrinks as it
approaches the source of the leak. A bar
graph at the bottom of the screen
accompanies and facilitates the search.
When the device is facing the leak, a cross
appears in the centre of the target. It is then
possible to photograph and save the precise
location of the leak.
Each photo is numbered, dated and timed
and shows the dB RMS level of the leak.
The photos can be uploaded directly onto
a PC via a USB cable (supplied), ready to be
attached to inspection reports.
It is still possible, whilst visually searching
for a leak, to use the traditional method of
leak detection, listening for the hissing
sound of the leak using the professional
headphones also supplied, which can be
plugged directly into the device.
Various accessories are available
for the LEAKSHOOTER® LKS1000-V3T+PRO
enabling it to be used for other applications
as well as leak detection.
More info? Contact us!
01Okt.
LEAKSHOOTER® LKS1000-V2T+IR WITH TOUCHSCREEN
Door Admin
Compressed air is a costly form of energy
and 20 to 40% of it is lost through leaks.
Systematically checking for and eliminating
leaks can therefore bring considerable
energy savings.
Film, view and photograph the precise spot
where compressed air, steam, pressurised
gas and vacuums are leaking using the
LEAKSHOOTER® LKS1000-V2T+IR.
The LEAKSHOOTER® LKS1000-V2T+IR is a
sophisticated tool. Extremely sensitive, it
is capable of finding all leaks, even the
smallest, including those no bigger than
the size of a syringe needle, at a distance
of 20 metres. Leaks can be detected in
all types of industrial environment thanks
to the possibility of adjusting the gain on
the device to filter out all undesirable noise.
The LEAKSHOOTER® LKS1000-V2T+IR is
used like a camera. When it comes near a
leak, a dynamic white target appears on the
large colour screen. The target shrinks as it
approaches the source of the leak. A bar
graph at the bottom of the screen
accompanies and facilitates the search.
When the device is facing the leak, a cross
appears around the centre of the target. It is
then possible to photograph and save the
precise location of the leak.
The photos can be uploaded directly onto
a PC via a USB cable (supplied), ready to be
attached to inspection reports.
It is still possible, whilst visually searching
for a leak, to use the traditional method of
leak detection, listening for the hissing sound
oftheleakusingtheprofessionalheadphones
also supplied, which can be plugged directly
into the device.
Embedded thermalIR camera (-10°C > +400°C)
for T° analysis with Min.-Max.-Center cursors
in full screen.
Various accessories are available for
theLEAKSHOOTER®LKS1000-V2T+IRenabling
it to be used for other applications
as well as leak detection.
The A4900 - Vibrio M instrument allows
you to perform all basic vibro-diagnostics
measurements such as bearing condition,
identification of mechanical faults and lubrication
assessment.
The A4900 - Vibrio M is equipped with 4MB
of memory for data storage. Data memory allows
you to perform off-route and route measurements.
The professional software DDS for Vibrio M can be
downloaded from the Adash website free of charge.
Our expert system for automatic machine fault
detection is included.
The A4910 Lubri is a maintenance tool used for
monitoring and control of the lubrication process.
The A4910 Lubri measures the actual bearing
lubrication status and informs the operator when
the lubrication state is optimal.
Application of the A4910 Lubri extends the bearing
lifetime and saves lubricants. Headphones can
be connected to listen to the bearing condition.
The A4910 Lubri is simple to operate and also
enables you to perform basic measurements
and diagnoses of bearing condition.
Now the A4910 Lubri can store the data
and perform route measurements as well.
Als u uw favoriete oscilloscoop niet kan kopen vanwege een te laag budget, dan is de Micsig TO1000 serie tablet oscilloscope een echt zeer mooie kans die je absoluut niet wil missen.
De tBook mini TO1000 serie maakt gebruik van een 8 inches industrieel TFT-LCD met 800 * 600 pixels schermresolutie. De tablet scope is beschikbaar in 2 of 4 kanalen, 70MHz of 100MHz bandbreedte, 1 G Sa / s sample rate & 28Mpts geheugen diepte.
Bekijk verdere eigenschappen & specificaties hier.
Hebt u een specifieke vraag, vul dan het contactformulier in of contacteer ons op het nummer +32(0)475/332 422. Wij staan u graag te woord.
21Okt
Warmtebeeldcamera's
Door Admin
Verlaagde prijzen op de warmtebeeldcamera's van FLUKE en FLIR Systems. Hebt u een specifieke vraag, vul dan het contactformulier in of contacteer ons op het nummer +32(0)475/332 422. Wij staan u graag te woord.
03Okt
Opleiding thermografie
Door Admin
A-measure heeft een ruim aanbod van opleidingen. Alle opleidingen worden gegeven door gecertificeerde thermografen level 2 & 3, Op aanvraag verzorgen wij ook op maat gemaakte opleidingen, die op uw eigen werkvloer gegeven worden.
A-measure heeft een samenwerking met de Bouwunie en FVB-FFC zo dat u gebruik kan maken van de vergoeding. Download onze 2 brochures en het aanmeldingsdocument van onze website.
Hebt u een specifieke vraag, vul dan het contactformulier in of contacteer ons op het nummer +32(0)475/332 422. Wij staan u graag te woord. Aangepaste prijzen Q4/2016
03Okt
Kane 458
Door Admin
Marktleidende "Must Have" rookgasanalyse meetinstrument voor alle verwarmingsspecialisten !!! De KANE 458 is het eerste handtoestel voor gasanalyse met een geintegreerde IR (infrarood) cel. Kane is de eerste Europese fabrikant die de IR technologie toegepast heeft om de CO2 waarde direct te meten. Dit heeft 2 voordelen, met name een hogere nauwkeurigheid en en een langere levensduur. 5 jaar waarborg!
Hebt u een specifieke vraag, vul dan het contactformulier in of contacteer ons op het nummer +32(0)475/332 422. Wij staan u graag te woord.
20Mei
Additel 761
Door Admin
Additel ADT761 Volautomatische drukkalibrator Maak het uzelf makkelijk
Met een ingebouwde high performance elektronische pomp en precisie drukregelaar, is de ADT761 serie geautomatiseerde druk kalibrator een turn-key oplossing voor de kalibratie van manometers, transmitters, en switchen dit zowel in het veld en in het laboratorium of werkplaats. In een draagbare pakket kan deze compacte kalibrator automatisch van 90% vacuüm tot 40 bar ABS en gauge genereren met 0,005% FS controle stabiliteit en 0,02% FS nauwkeurigheid.
Hebt u een specifieke vraag, vul dan het contactformulier in of contacteer ons op het nummer +32(0)475/332 422. Wij staan u graag te woord.
20Mei
Opleidingen
Door Admin
A-measure heeft een ruim aanbod van opleidingen. Alle opleidingen worden gegeven door gecertificeerde thermografen level 2 & 3, Op aanvraag verzorgen wij ook op maat gemaakte opleidingen, die op uw eigen werkvloer gegeven worden.
A-measure heeft een samenwerking met de Bouwunie en FVB-FFC zo dat u gebruik kan maken van de vergoeding. Download onze 2 brochures en het aanmeldingsdocument van onze website.